Thick Fieldstone Flagstone Molds (1 set of 6 Molds)

Free Shipping Available on this product!

Now you can be part of the hottest trend in America – Custom-colored, “concrete” counter tops, wall stone, and floor tile, but without paying the high retail cost!

Why pay $8.00-$12.00+ per square foot and more for stone and tile?

We show you how to make this hand-crafted fieldstone like that pictured, with our free instructions and molds.

Make real-looking stone like that pictured: freestanding walls, patios, paths, pavers, or stone veneer with these molds.

We tell you how!

And you can start next week!

The “how to” process is so simple; virtually anyone can do it!

It’s like making a cake! But no oven is needed!

Here’s how:

1. Lubricate the molds. A light vegetable oil will do if you don’t have mold release.
2. Mix a bag of pre-mix concrete. Get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional unless you want just plain gray.
4. Pour mix into molds. Vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed – over-night is fine.
6. Carefully flip the molds over the next day and pop out what you’ve created from the mold!

That is obviously a simplified version of the process, but it is that easy.

And free instructions and email support are included with each purchase.

We are proud to say that all of our products and the raw materials used in them are made in the USA.

Our molds are designed and manufactured by us in Port Charlotte, Florida since 1992!

The beautiful fireplace shown in our photo was made by Tim McClelland, an eBayer, with no previous experience making stone! He not only built the fireplace. He made the stone using our molds and instructions!!!

We’ve made two pallets of our “castle stone” with three bags of Portland cement, (about $7.50 per bag), that equals just over 112 square feet of stone. You will get similar results with our “Olde Appalachian Fieldstone” molds.

The approximate sizes of the 6 different molds are, (in inches), 17×15, 10×7, 10×13, 11×8, 13×9, and 8×9. These molds are between 2″ to 2-3/4″ thick. Sizes are approximate and were rounded off to the nearest full inch. The mold sheets are 28″x36″ as they come off of the machine. The molds will be cut apart prior to shipping for ease of pouring and de-molding.

You can make custom-colored, heavy, medium, or light-weight stone with them. Make thick stepping stones, walls, or thinner stone for flooring or veneer, depending on the thickness you pour them. These molds are between 1-1/2″ to 2-1/2″ thick. Molds are separated for you before shipping.

Complete free instructions on how to make the stone are included!

You get six (6) molds that make a natural 7+/- sq. ft. pattern. Add our other five OAF sheets, (available in our store), to get an even better “mix” of stones for larger areas.

We also make many other sizes of Olde Appalachian Fieldstone molds that are approximately 1-1/2″ to 2-1/2″ thick, and will blend with these perfectly for walls, walks, etc.

The fireplace photo in this listing includes stone made with molds from this and other OAF sets as well.

Want more? Buy all five sets of Olde Appalachian Fieldstone for only $399.98 – You save $100 on the five sets!

Either order it from our store as “Olde Appalachian Fieldstone set of five” or email us if you have any questions.

These molds are made with .060, high-impact, rubberized industrial abs plastic, For flexibility and long life, and can be used hundreds of times if cared for properly.